Stop piecing together drive start-ups from YouTube
- Tired of stitching a start-up together from five videos, none of them your drive?
- Tired of factory training that turns into three days of sales pitches and donuts?
One streamlined method. Proven. Repeatable. Reliable.
Two ways most techs learn a new drive. Both cost you.
The YouTube scramble
- Wrong drive, wrong firmware, wrong country
- Ten minutes of intro and an ad before the one parameter you need
- Nobody shows the whole start-up, start to finish
- The line is still down and the drive is still faulted
The factory class
- Days away from the plant, plus travel
- Half of it is a product pitch
- A binder you will never open again
- Taught on one brand, and your plant runs five
Learn the drive you run, the same way every time
Every course here teaches one start-up method, filmed on the real drive with a clock on screen. The clock starts at first power and stops when the backup is saved. You see the whole thing, uncut.
Once you have the method on one drive, the next drive is just a new parameter map.
Before power, the start-up, and after it runs
Most first-week drive faults are set up before the drive ever runs. So the method covers the whole job, not just the keypad.
Install it right
Nameplates, heat, grounding, cable, shields and megger checks. Free course.
The 20 Minute Start-Up
The parameters that must be right, the ones that make it run well, the tune, and the backup. One drive per course.
Baseline and handoff
Record what good looks like, hand it off clean, and know what to check in year one.
Pick your drive
First Power, No Surprises: Install a VFD Right the First Time
Everything that has to be right before the drive sees power. Start here.
The 20 Minute Start-Up: ABB ACS380 and ACS580
Both drives program the same way. Filmed on an ACS380 with Drive Composer.
It's Running. Now What?
Baseline, handoff and first-year checks for a new VFD.
Ten more drives, same method
Every start-up course comes with
- Before the First Fault, the book
- The VFD Mentor skill for Claude
- Printable start-up forms
- Certificate of Completion
Brand and model names describe the drives taught. Wayward Leaders is not affiliated with or endorsed by ABB, Rockwell Automation, AutomationDirect, Invertek, Danfoss, Yaskawa, Schneider Electric, Siemens, Mitsubishi Electric or Control Techniques.
Practice before you touch the real drive
VFD Simulations
Try start-ups, faults and tuning on a simulated drive. Break it as many times as you like.
Try a simulationBuild a Demo Case for Under $1K
Plans and parts list for a bench trainer your crew can practice on.
Get the plansDr. Carl Lee Tolbert
Carl still commissions drives every week as a senior application engineer in Sioux Falls, South Dakota. He is the person the field calls when a drive will not start and nobody else can find out why.
Before that he was vice president of engineering for an automation distributor, and before that a Navy Gas Turbine Systems Technician on the USS Thach. He wrote Before the First Fault because most first-week faults start before the drive ever runs.
Before you enroll
Do I need the drive to take the course?
It helps, but no. Every course is filmed on the real drive, and the free simulations let you practice the moves before you are standing in front of one.
Why "20 minutes"?
That is the target on the clock from first power to backup saved, once you have the method down. Your first one will take longer. The point is that it comes out the same way every time.
My drive isn't listed. Will it be?
Ten more drives are in the works, listed above. Past those, new drives are added one at a time. Leave your email below and reply to the first email with the drive you run.
Can I train my whole crew?
Yes. For in-person classes at your plant, see waywardleaders.com.
Do these count for continuing education?
Not yet. Online continuing education editions are being filed with the states. The in-person classes already carry state approvals, listed at waywardleaders.com.
Get told when your drive's course opens
One email per new course. No daily drip.